ToyBoy
How it works
ToyBoy allows you to modulate two CV inputs in attenuvertion using knobs and / or a PlayStation joystick.
The output « mix » is the sum of the two CVs. The gate output is activated when the joystick is pressed.
If no jack is connected to an input, then a fixed voltage is applied to it. This makes it possible to generate variable voltages from the potentiometer and / or the joystick.
This feature is convenient for adding an offset to a CV using the mix output.
The output « mix » is the sum of the two CVs. The gate output is activated when the joystick is pressed.
If no jack is connected to an input, then a fixed voltage is applied to it. This makes it possible to generate variable voltages from the potentiometer and / or the joystick.
This feature is convenient for adding an offset to a CV using the mix output.
Specifications
Width : 8hp (40mm)
Depth : 35mm
+12V : 10mA
-12V : 4mA
Input CV : between -5V and +5V
Output CV : -10V to +10V
Gate output : about 10V
Depth : 35mm
+12V : 10mA
-12V : 4mA
Input CV : between -5V and +5V
Output CV : -10V to +10V
Gate output : about 10V
Patch ideas
Without any entry connected
– Connect the output X to a CV input (cuttof frequency of a filter for example).
– Connect the Y output to another CV input (amplitude of a VCA, for example).
Use the joystick to control both parameters with your finger.
– Connect the Y output to another CV input (amplitude of a VCA, for example).
Use the joystick to control both parameters with your finger.
With a LFO CV rate controlled
– Connect the X output to the LFO’s Rate input
– Connect the LFO output to the Y input of ToyBoy.
– Connect the Y output of ToyBoy to the cutoff of a filter for example.
Use the joystick to modulate the speed of the LFO and its intensity.
– Connect the LFO output to the Y input of ToyBoy.
– Connect the Y output of ToyBoy to the cutoff of a filter for example.
Use the joystick to modulate the speed of the LFO and its intensity.
With a LFO
– Connect two waveforms of one LFO to the two CV inputs.
– Use the mix output whose shape can be modulated by the Joystick.
– Use the mix output whose shape can be modulated by the Joystick.
With a LFO
– Connect a waveform to the input X.
– Do not connect anything in Y.
– Use the mix output whose attenuvertion is modulated in X and offset in Y.
– Do not connect anything in Y.
– Use the mix output whose attenuvertion is modulated in X and offset in Y.
With an envelop and a VCA
– Connect ToyBoy gate output to an envelop that is connected to a VCA.
The envelop is trigged py pressing the joystickInput your text here! The text element is intended for longform copy that could potentially include multiple paragraphs.
The envelop is trigged py pressing the joystickInput your text here! The text element is intended for longform copy that could potentially include multiple paragraphs.